Mx1050/Mx1100 Universal Machine Interface (UMI) Utilities:

• UMI MxServer V3.56 XP Base EXE - Win NT5 Base MxServer Version - LATEST

• UMI MxServer V3.50 XP Base EXE - Win NT5 Base MxServer Version - 2.6Meg

• UMI MxServer V3.40 XP Base EXE - Win NT5 Base MxServer Version +

• UMI MxServer V3.46 XP Patch EXE - Win NT5 (XP) VNC Server for Virtual Serial Ports (556k) - Note that you must use RTS/CTS for the flow control (DNC side only) - normal flow control for the Ax9150/Mx1100/Mx1050 CNC side.

• MultiDNCPathUpdate.reg - Registry Patch for Editor Path Issue - Use when you can't find projects path

• UMI MxServer V3.27 NT - The same UMI MxServer install for Windows NT4  (3453k)

• UMI Pictorial Installation Manual - Still useful (for older MxServer 3.20) UMI Install Manual in PDF (589k) 

• UmiTracker Install Ver 8 -  Optional MxServer Component that keeps track of UMIs - boot this first if used  (1858k)

• Locate IP Ver17
  - Mx1100 UMI Board Finder & Configuration Utility - (184k)

• Rfu.exe
  - UMI Remote File Upload Utility (needs Programming Cable to load UMI firmware) - (444k)

  • COLDLOAD.BIN - RFU Utility BIN File

  • pilot.bin - RFU Utility BIN File

• UMI Loader Utility
  - Use this to load the latest G14 firmware in the Mx1100 UMI - (452k ZIP) 

• UMI Loader Utility Manual
   - Manual on how to use the Mx1100 Loader Utility - (153k PDF)

• UmiTrafficTester7.exe
  - The "Hammer" Traffic Test repeatedly tests UMI network end to end - (52k) July 19, 2004 

• File Validator Utility
  - Check NC files for consistent file start & end formats - ZIP - (1507k) August 6, 2004

WinShuttle Files for Memex CNC Data Shuttle:

• WinShuttle 1.4.2
  - Our latest WinShuttle Configuration and Transfer Utility for Data Shuttles for MxDS2/DS1 (Full) - (2755k) 

  (New version has CNC Auto Mode on Power ON Option + USB Auto PC Connect = Even better Plug N' Play)

  • Disk1 - WinShuttle 1.4.2
    - Diskette Version of our WinShuttle Software Above - (1414k)

  • Disk2 - WinShuttle 1.4.2
    - Diskette Version of our WinShuttle Software Above - (1337k)

• WinShuttle 2.0 for DOS
  - Our old DOS utility for those who need it  to transfer files to Data Shuttles - ZIP - (29k) 

• ShuttleEmu.exe
  - A utility to test WinShuttle software, serial ports, cables or settings from another computer - (36k)

Facit N1060:

• Facit N1060 System Diskette V.711.zip
  - Facit N1060 Diskette Drive System Disk - ZIP - (213k) 

Miscellaneous Utilities:

• XVI32.ZIP
  - Really useful free HEX Editor

• WCOM32 Utility.exe
  - Great free serial port tester from COMTROL - use with loopback to test all lines - (27k)

• WinZIP Ver 10.0
  - PKWare's Great WinZip Utility - (3762k)

• Rightclick.zip
  - Utility to Register DLL Files - (1k)

• AXES.zip
  - A shareware utility that allows large file binary edits of files - (110k)

• Hyptrm.zip
  - HyperTerminal Private Edition that supports TCP/IP + COM port links for testing - (733k)

• PCI4S550.zip
  - Basic StarTech 4 Port PCI Multi-Port Card Drivers (NT, XP, etc) - (367k)

• PCI4S650.zip
  - StarTech 4 Port PCI Multi-Port Card Drivers (NT, XP, etc) Dual Voltage (5 V and 3.3V for New PCs)- (1046) 

• PCI4S650PW
  - StarTech 4 Port PCI Multi-Port Card Drivers PCI4S650 Manual - PDF (123k) 

• Free-Serial-Port-monitor.exe
  - A decent serial port monitor for the PC - Ken's Choice - (2893k) 

• MSSTDFMT.DLL
  - Driver needed for Microsoft Windows (sometimes missing with MxServer Installs in NT4) - (116k)

• NC_BASIC.000
  - Fanuc 16MB for 0010 CPU Card - Robodrill Source - (1024k)

• PCMCIA SRAM Card Wizard Utility
  - SRAM Card Wizard - Great Utility for getting PCMCIA SRAM Cards to Work - EXE (4090k)

• MSDOS 6.20 Boot Disk
  - For those who need it, a Microsoft DOS 6.20 Boot disk - ZIP (85k)

• Blank Fanuc 16/18 SRAM File -  SRAM2_5D.FDB
  - You can use this blank 512k file named SRAM2_5D.FDB (from a Fanuc 16, 2 meg dump) and copy it over and over to your PCMCIA SRAM Card with the appropriate names to make the CNC notice the files in the directory. Once reloaded, the sequential blank files will effectively clear the CNC memory.