Ax750 I/O Link for any Fanuc i-series Controller

Ax750 I/O Link - Fanuc Interface Board

Plug the controllers I/O bus JD1A / JD1B 20 pin high density Honda connector cable into one end of the board and connect the supplied cable back into the controller's JD1A / JD1B connector.
Monitor any signal from the machine.
“listen to the heartbeat of the machine without disruption”
Designed to passively monitor any Fanuc Serial I/O bus.
A natural complement to Memex’s Ax9150 Universal Machine Interface board for OEE+DNC
Fits to any Fanuc controller with a serial I/O link
Works with any Fanuc ladder configuration
You can set the dip switches so as to garner any ladder signal from any control.
It has the ability to dynamically set any header address anywhere in the I/O bus (2 groups of 4 signals).
Allows one to one (pin to pin) I/O interface with the Memex Ax9150 board
Can be configured to monitor output signals that is being transmitted SIN or SOUT on the RS485 I/O Bus.
Simple Phoenix style quick disconnect connectors for power and I/O
Can configure and monitor any input or output signals to be used with other devices
Easy magnetic mount (screw-less) anywhere in the metal cabinet.

Reduce installation costs
Can easily synthesize any signals of the machine contained in the CNC ladder logic..
Passive listening, non-intrusive installation
Saves hours of time in installing and finding signals per machine.
Easy to install on any Fanuc control with a serial I/O Link - Plug n' Play
No messy wires, cabling or soldering – a compact functional unit.
Preliminary step to any OEE system – Machine Monitoring.